Black Beauty Iron Copper Slag

 

Why Black Beauty Iron Copper Slag? It is among the lowest cost per square foot abrasive and it has a very low consumption rate on new steel.

Black Beauty Iron Copper Slag

Garnet is one of the very best abrasive options for many blast shop operations. Some of the benefits are listed below. High Speed, very Low Dust and the lowest Consumption rate compared to conventional abrasives highlight the advantageous of Garnet. Some of the other benefits are listed below.

    • Among the lowest cost per square foot abrasive
    • New and coated steel
    • Environmentally Friendly Abrasive – no beryllium
    • Extremely low dust
    • Very low consumption rate on new steel (~ 1 to 2 lbs/sq. ft. at 110psi Nozzle)
    • Low embedment
    • Recycle 2 to 3 times
    • Available in 50 & 100 lb bags, 3000 & 4000 lb Bulk Bags, Bulk & Rail
    • Tech Data Sheet (PDF)
    • SDS (PDF)

Please contact us or call us at 314-241-5333 for additional information

Technical data
    • Abrasive Type
      Iron Silicate
    • Shape
      Uniform Angular
    • Bulk Density (lbs/cu.ft.)
      110 to 120 lbs/cu.ft.
    • Specific Gravity
      3.8 g/cm3
    • MOH Hardness
      7
    • Crystalline Silica Content
      < 0.1%
    • Potential for Embedment
      Low (~4%)
    • Dust Levels
      Low
    • Abrasive Fracture Potential
      Low
    • Chloride Content
      0 to 5 ppm
    • SSPC SP-10 Near White (over new steel Rust Grade A/B)
      –
    • Production Rate (sf/hr):
      450+ sf/hr
    • Consumption Rate (lbs/hr):
      700 lbs/hr
    • # of Recycles:
      2 to 3
    • Material Cost per sf : w/o Recycles (StL)
      $0.32/sf
    • Material Cost per sf: w/ Recycles (StL)
      $0.28/sf
    • Cost per Ton (FTL to StL)
      $310 (Freight ~$120/ton)
    • QPL (< 1% Silica & < 3% Cl)
      MIL-A-22262 (SH)
    • Disposal Cost per Ton
      ~$100/ton
    • Color
      Black